{ lib,config, pkgs, ...}:
{
 
  networking.firewall = {
    allowedUDPPorts = [ 51820 ]; # Clients and peers can use the same port, see listenport
  };


networking.wireguard.interfaces = {
    # "wg0" is the network interface name. You can name the interface arbitrarily.
    wg0 = {
      # Determines the IP address and subnet of the client's end of the tunnel interface.
      ips = [ "2a01:4f8:c012:59b8:ac1e::3/128" ];
      listenPort = 51820; # to match firewall allowedUDPPorts (without this wg uses random port numbers)
      #dns = ["1.1.1.1,1.0.0.1,2606:4700:4700::1111,2606:4700:4700::1001"];
      mtu = ["1300"];
      # Path to the private key file.
      #
      # Note: The private key can also be included inline via the privateKey option,
      # but this makes the private key world-readable; thus, using privateKeyFile is
      # recommended.
      privateKeyFile = "./secrets/private";

      peers = [
        # For a client configuration, one peer entry for the server will suffice.

        {
          # Public key of the server (not a file path).
          publicKey = "JTecKVDA3RSfwcbaBtcEUG4RsTEUUJTJyb65aABQAmg=";
          presharedKeyFile = "./secrets/pre";
          # Forward all the traffic via VPN.
          allowedIPs = [ "0.0.0.0/0,::/0" ];
          # Or forward only particular subnets
          #allowedIPs = [ "10.100.0.1" "91.108.12.0/22" ];

          # Set this to the server IP and port.
          endpoint = "fumbled.strangled.net:51820"; # ToDo: route to endpoint not automatically configured https://wiki.archlinux.org/index.php/WireGuard#Loop_routing https://discourse.nixos.org/t/solved-minimal-firewall-setup-for-wireguard-client/7577

          # Send keepalives every 25 seconds. Important to keep NAT tables alive.
          persistentKeepalive = 15;
        }
      ];
    };
  };
   networks.wg0 = {
      # See also man systemd.network
      matchConfig.Name = "wg0";
      # IP addresses the client interface will have
      #address = [
      #  "fe80::3/64"
      #  "fc00::3/120"
      #  "10.100.0.2/24"
      #];
      #DHCP = "no";
      #dns = ["1.1.1.1,1.0.0.1,2606:4700:4700::1111,2606:4700:4700::1001"];
      #ntp = ["fc00::123"];
      #gateway = [
       # "fc00::1"
      #  "10.100.0.1"
      #];
      #networkConfig = {
      #  IPv6AcceptRA = false;
      #};
    };
  
}