58 lines
1.6 KiB
Markdown
58 lines
1.6 KiB
Markdown
# What Matereial do I use ?
|
|
I use 3mm whithe ABS 3d Printing marerial from mateial 4 print.
|
|
|
|
# Print Settings:
|
|
I used mutch infill like 40% and retraction diffrent as recommended.
|
|
|
|
would see how it performes.
|
|
|
|
## Official Recommandations:
|
|
|
|
Retraction: Off
|
|
|
|
Speeds: 45/50
|
|
|
|
Extruder Temp: 230c
|
|
|
|
Infill 10%
|
|
|
|
Raft+Support: Off
|
|
|
|
No Heated Bed
|
|
|
|
# Printer:
|
|
I used a Ultimaker 2+ to print my parts with glass bad and heeted enclosure.
|
|
Thanks to Atrakktor ev hamburg where I borrow it from.
|
|
|
|
# Poolysmoothing:
|
|
I used ABS for the idea of Polysmoothing it using Acetone:
|
|
|
|
1. Step
|
|
I sanded my prints to get a nicer finish and a plain surface to sit tham on.
|
|
2. Step
|
|
In regard to the massive Printsettings I used a wire to dip the prints directly into the acetone.
|
|
|
|
It gos mutch faster and the prints got shiny too.
|
|
|
|
Probably i can uns Acetone as a kind of glue to stik multibale prints together.
|
|
|
|
3. Step
|
|
|
|
## poolysmoothing with this method works fine, but has some problems.
|
|
It sticks to the paper and you can't remove it well Probably an old headbead could fix that.
|
|
allso dont lose your nops in the ABS if you lose it its lost.
|
|
Dont dig it to long in the Acetate pod. probably it could be inproved in future.
|
|
if i had dad a more evan print it could probably work better
|
|
|
|
is that a retraction problem ?
|
|
|
|
|
|
Let the prints Dry.
|
|
|
|
# Ideeas for future:
|
|
Try to use thinner material ABS seems cool, but for no particular reason it seems like the printing shuld be very thig to work propaly.
|
|
probapply i can tune it with lower walls and infill to achive a tranclucant look.
|
|
|
|
I shuld probbalbly redisign the nops to get magneticly attached :3
|
|
|