[WIP] badge_test

badge_test.json

@@ -0,0 +1,4 @@
+{
+    "parameterSets": "",
+    "fileFormatVersion": "1"
+}

badge_test.scad

@@ -0,0 +1,72 @@
+$fn=32;
+LAYER_HEIGHT=1;
+NAME="c6hex";
+COLOR_BASE="#ffffff";
+COLOR_LOGO="#7f7f7f";
+COLOR_NAME="#7f7fff";
+
+RENDER_BASE_COLOR=true;
+RENDER_LOGO_COLOR=true;
+RENDER_NAME_COLOR=true;
+
+module name() {
+  translate([18, 4, 0]) text(NAME, font="Roboto:bold");
+}
+
+module logo() {
+  translate([10, 10])
+    scale([16, 16])
+      circle(d=1, $fn=6);
+}
+
+module name_outline() {
+  minkowski() {
+    name();
+    circle(r=2.5);
+  }
+}
+
+module logo_outline() {
+  minkowski() {
+    logo();
+    circle(r=2);
+  }
+}
+
+module outline() {
+  union() {
+    name_outline();
+    logo_outline();
+  }
+}
+
+module name_cutout() {
+  difference() {
+    outline();
+    name();
+  }
+}
+
+module logo_cutout() {
+  difference() {
+    name_cutout();
+    logo();
+  }
+}
+
+module name_cutout_plate() {
+  linear_extrude(height=LAYER_HEIGHT) name_cutout();
+}
+
+module logo_cutout_plate() {
+  linear_extrude(height=LAYER_HEIGHT) logo_cutout();
+}
+
+module name_base_plate() {
+  linear_extrude(height=LAYER_HEIGHT) outline();
+}
+
+if (RENDER_BASE_COLOR) color(COLOR_BASE) translate([0, 0, 3*LAYER_HEIGHT]) logo_cutout_plate();
+if (RENDER_LOGO_COLOR) color(COLOR_LOGO) translate([0, 0, 2*LAYER_HEIGHT]) name_cutout_plate();
+if (RENDER_NAME_COLOR) color(COLOR_NAME) translate([0, 0, 1*LAYER_HEIGHT]) name_base_plate();
+if (RENDER_BASE_COLOR) color(COLOR_BASE) translate([0, 0, 0*LAYER_HEIGHT]) name_base_plate();

c3cat-bottle-clip/c3cat-bottle-clip.scad

@@ -150,8 +150,13 @@ module bottle_clip(ru=13, rl=17.5, ht=26, width=2.5, name="c3cat", font="write/o
     if (RENDER_COLOR_ONE) {
       color("black") difference() {
         cylinder(r1=rl+width, r2=ru+width, h=ht);
-          name(name=name, font=font, rl=rl, ht=ht, ru=ru);
+        difference() {
-          logo(logo=logo, rl=rl, ht=ht, ru=ru, width=width);
+          union() {
+            name(name=name, font=font, rl=rl, ht=ht, ru=ru);
+            logo(logo=logo, rl=rl, ht=ht, ru=ru, width=width);
+          }
+          cylinder(r1=rl+width/2, r2=ru+width/2, h=ht);
+        }
         translate([0,0,-1])
           cylinder(r1=rl, r2=ru, h=ht+2);
         // finally, substract a cube as a gap so we can clip it to the bottle
@@ -164,7 +169,7 @@ module bottle_clip(ru=13, rl=17.5, ht=26, width=2.5, name="c3cat", font="write/o
     if (RENDER_COLOR_TWO) {
       color("orange") difference() {
         name(name=name, font=font, rl=rl, ht=ht, ru=ru);
-        cylinder(r1=rl+width, r2=ru+width, h=ht);
+        cylinder(r1=rl+width/2, r2=ru+width/2, h=ht);
         outer_cutoff(rl, e, ru, ht, width);
       }
     }
@@ -172,7 +177,7 @@ module bottle_clip(ru=13, rl=17.5, ht=26, width=2.5, name="c3cat", font="write/o
     if (RENDER_COLOR_THREE) {
       color("yellow") difference() {
         logo(logo=logo, rl=rl, ht=ht, ru=ru, width=2*width);
-        cylinder(r1=rl+width, r2=ru+width, h=ht);
+        cylinder(r1=rl+width/2, r2=ru+width/2, h=ht);
         outer_cutoff(rl, e, ru, ht, width);
       }
     }